OMICRON MEGNAHELIC GAUGE USA Wholesale Management Management- D.P.ENGINEERS
OMICRON DIGITAL PRESSURE GAUGE AS313
| Description & Features: |
| Simple 2 button operation |
| Reset to zero feature |
| Backlight turns on when on/off button is pressed |
| Option for display to remain continuously on |
| Peak pressure indication option |
| 316L welded diaphragm seal |
| Rubber boot is standard |
| ASME B40.100 compliant |
| ±1% accuracy (±0.5% optional for gauges up to 5,000 psi) |
| 1 year warranty |
| Applications: |
| Ideal for commercial and industrial application in both test measurement and general |
| purpose installations. |
| Specifications : |
| Case Size | : 2.5” (63mm) |
| Case Material | : ABS (IP64) |
| Rubber Boot | : Silicone rubber (IP65) |
| LCD Display | : 2” x 3/4” (48mm x 16mm) |
| Connection | : 1/4” NPT 304SS |
| Sensor | 316L welded, Piezo |
| Operating Life | : 1 million cycles |
| Power Supply | : 2 x AAA battery (1.5V) |
| Battery Life | : 2 yrs (auto shut-off mode) |
| Power Mode | : Auto or manual shut-off |
| Display Digits | : 4 digits to 5,000 psi 5 digits for 10,000 psi and 15,000 psi |
| Resolution | : 1 digit |
| Pressure Unit Selection | : psi, mHO, mmHg, mbar, kPa ranges 100 psi psi, bar, kg/cm, MPa, atm ranges ! 160 psi |
| Operation Mode | : Continuous process pressure reading or peak pressure reading |
| Response Time | : 3 Hz display refresh rate |
| Proof / Burst Pressure | : 200% / 300% FS |
| Operating / Storage Temperature |
: 14°F to 122°F (-10°C to 50°C) -4°F to 167°F (-20°C to 75°C) |
| Accuracy | : ±1% (±0.5% optional for gauges up to 5,000 psi) |
Additional Information:
- Minimum Order Quantity: 3091976 Number
- Pay Mode Terms: T/T (Bank Transfer)
Omicron DIGITAL MANMETER KELLER LEO2
| Model | : LEO2 |
| Temperature | : 0 to 50°C |
| Range | : -1 to 700 bar |
| Battery Life | : 1000 hours |
| Accuracy | : ± 0.1% of F.S |
| Output | : NIL |
| Description : |
LEO 2 is a compact, micro-processor (ìP) controlled, highly accurate and versatile pressure measuring instrument with digital indication. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. Its characteristics arestored in the instruments internal EEPROM. The ìP of the LEO 2 reads the characteristic values and calculates therefrom the pressure to an accuracy of < 0,1 %FS at room temperature.
The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.- pressure since the last RESET.
LEO 2 has two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function or unit. The right key is also used to switch between the Max.- and Min.-value.
| Specifications : |
| Pressure Range | : -1…3 bar |
| Resolution | : 1 mbar |
| Overpressure | : 10 bar |
| Number of Digits | : 5 Digit |
| Accuracy RT (room temperature) * | : < 0,1 %FS |
| Total Error Band (0…50 °C) * | : < 0,2 %FS |
| Storage- / Operating Temperature | : -20…70 °C / 0…50 °C |
| Compensated Temperature Range | : 0…50 °C |
| Supply | : 3 V battery, type CR 2430 |
| Battery Life | : 1’000 hours continuous operation |
| Pressure Connection | : 7/16”-20 UNF (adapter G 1/4” included) |
| Protection, CEI 529 | : IP 65 |
| Diameter x Height x Depth | : 59 x 95 x 32 mm |
| Weight | : 125 g |
Additional Information:
- Minimum Order Quantity: 3091976 Number
- Pay Mode Terms: T/T (Bank Transfer)
Omicron Differential Pressure Switch DP930
| Model | : DP930 |
| Media | : Air / Gases |
| Enclosure | : ABS |
| Wetted Parts | : Silicone |
| Range | : 0 to 4kPa |
| Accuracy | : ±2% of F.S |
| Electrical Rating | : 2A, 250V AC |
| Special Features : |
| High Quality, Low-Cost |
| Visual Set Point Indication |
| Hassle-Free Field Adjustment Knob |
| 2% Repeatability |
| Description : |
The DP930 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 1A @ 250V and can be set as low as 0.08” w.c. (20 Pa)
| Specifications : |
| Media | : Air and compatible gases |
| Max Pressure | : 40” w.c. (10KPa) |
| Temperature Limits | : 5 to 140° F (-15 to 60° C) |
| Electrical Rating | : 2A @ 250 V |
| Electrical Connectio | : Screw terminals |
| Process Connection | : 3/16” I.D. flexible tubing |
| Enclosure Rating | : NEMA 13 (IP 54) |
| Weight | : 3.5 oz (100 g) |
| Accessories | : 6 ft (1.8m) flexible tubing (2) Static pressure fittings Z type mounting bracket Mounting screws |
| Repeatability | : 2% |
| Deadband | : approximately 10% of max set point |
Additional Information:
- Minimum Order Quantity: 1976 Number
- Pay Mode Terms: T/T (Bank Transfer)
OMICRON Differential Pressure Gauge USA
We are leading supplier and trader of OMICRON Differential Pressure Gauge USA. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge.
Product Details:
Pressure Range Model Number Pressure Range
Pa / kPa
0 – 0.25” S2000-60PA 0 – 60
0 – 0.5” S2000-125PA 0 – 125
0 – 1” S2000-250PA 0 – 250
0 – 2” S2000-500PA 0 – 500
0 – 3” S2000-750PA 0 – 750
0 – 4” S2000-1KPA 0 – 1
0 – 5” S2000-1.5KPA 0 – 1.5
0 – 6” S2000-2KPA 0 – 2
0 – 8” Zero Center
0 – 10” S2300-60PA 30 – 0 – 30
0 – 15” S2300-120PA 60 – 0 – 60
0 – 20” S2300-250PA 125 – 0 – 125
0 – 25” mm w.c.
0 – 30” S2000-6MM 0 – 6
0 – 50” S2000-10MM 0 – 10
0 – 100” S2000-25MM 0 – 25
Additional Information:
- Minimum Order Quantity: 1976 Number
- Pay Mode Terms: T/T (Bank Transfer)
OMICRON HIGHLY PRECISE DIGITAL MANOMETER KELLER LEX1
| Model | : LEX1 |
| Temperature | : 0 to 50°C |
| Range | : -1 to 1000 bar |
| Battery Life | : 2000 Hours |
| Accuracy | : ± 0.01% of F.S |
| Output | : RS485 Optional |
| Description : |
LEX 1 is a micro-processor controlled, accurate and versatile digital pressure measuring instrument with integrated Max.-/Min.-function for calibration and testing purposes.
The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.-pressure since the last RESET.
LEX 1 has two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function resp. unit or serves to display the Max.- and Min.-value.
| Specifications : |
| Pressure Range | : -1…2 bar |
| Resolution | : 0,1 mbar |
| Overpressure | : 3 bar |
| Number of Digits | : 5 Digit |
| Accuracy (10…30 °C) * | : 0,05 %FS |
| Precision * | : 0,05 %FS |
| Precision optional (≥ 20 bar) * | : 0,025 %FS / 0,01 %FS |
| Storage- / Operating Temperature | -10…60 °C / 0…50 °C |
| Compensated Temperature Range | : 0…50 °C |
| Supply | : 3 V battery, type CR 2430 |
| Battery Life | : 2000 hours continuous operation |
| Pressure Connection | : G1/4” |
| Protection | : IP65 |
| Diameter x Height x Depth | : 76 x 118 x 42 mm |
| Weight | : 210 g |
Additional Information:
- Minimum Order Quantity: 1976 Number
- Pay Mode Terms: T/T (Bank Transfer)
OMICRON HIGH ACCURACY DIGITAL PRESSURE GAUGE VE100
| Model | : VE100 |
| Temperature | : 0 to 50°C |
| Range | : -1 to 700 bar |
| Battery Life | : 1000 Hours |
| Accuracy | : ± 0.075% of F.S |
| Output | : Optional |
| Description : |
VE100 is a micro-processor controlled, accurate and versatile digital pressure measuring instrument with integrated Max.-/Min.-function for calibration and testing purposes.
The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.-pressure since the last RESET.
VE100 has three operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function resp. unit or serves to display the Max.- and Min.-value.
| Specifications : |
| Pressure Range | : -1…700 bar |
| Resolution | : 0,1 mbar |
| Overpressure | : 2X |
| Number of Digits | : 4 1/2 Digit |
| Accuracy (10…30 °C) * | : 0.075 %FS |
| Precision * | : 0.075 %FS |
| Precision optional (≥ 20 bar) * | : 0.05 %FS / 0.01 %FS |
| Storage- / Operating Temperature | -10…60 °C / 0…50 °C |
| Compensated Temperature Range | : 0…50 °C |
| Supply | : 1.5 V battery * 5 |
| Battery Life | : 1000 hours continuous operation |
| Pressure Connection | : G1/4” |
| Protection | : IP65 |
| Diameter x Height x Depth | : 76 x 118 x 42 mm |
| Weight | : 210 g |
OMICRON MEGNAHELIC GAUGE
SpecificationBrandOMICRONMODELH2300-60PaRANGE-30 TO 30 PASCALSDELIVERY TIME1-2 WEEKSDescription
Product Code : T/P/MHG/OMI/030/001
* RANGE : -30 TO 30 PASCALS
* MODEL : H2300-60Pa
Additional Information:
- Minimum Order Quantity: 786 Number
- Pay Mode Terms: T/T (Bank Transfer)
OMICRON DIGITAL PRESSURE GAUGE AS312
| Model | : AS312 |
| Temperature | : -10 to 50°C |
| Range | : 0 to 700 bar |
| Battery Life | : 2000 Hours |
| Accuracy | : ± 0.5% of F.S |
| Output | : NIL |
| Description : |
The AS312 series is a media isolated digital pressure gauge featuring multiple measurement units, min/max readings, selectable tare/zero and an automatic power
off to conserve battery power. Also, a backlight provides improved visibility under marginal lighting conditions.
The AS312 will operate with any liquid or gas that is compatible with 17-4PH stainless steel. Please consult the factory for other available wetted materials.
The design of this one-piece sensing element contains no silicone oil, welds or internal O-rings. The AS312 is ideal for oxygen service, hydrogen* tanks and other critical applications where fluid filled gauges cannot be used.
| Specifications : |
| Display Update Rate | : 2 samples per second |
| Power | : 9 Volt Alkaline Battery |
| Automatic Power Off | : 1 Hour |
| Battery Life | : 2000 Hours Operation (typical) |
| Protection Rating | : NEMA 4, IP 65 |
| Instrument Case | Poly carbonate |
| Performance @ 25°C (77°F) : |
| Pressure Range | : A number of preset ranges are available |
| Measurement Units | : PSI, BAR, kg/cm, ATM, InH20, InHg |
| Accuracy | : <±0.5% BFSL (Includes Non-linearity, Hysteresis and Non-repeatability) |
| Stability (1 year) | : ±0.25% FS (typical) |
| Over Range Protection | : 2X Rated Pressure |
| Burst Pressure | : 5X or 20,000 PSI whichever is less |
| Pressure Cycles | : >100 Million |
| Environmental Data |
| Temperature | |
| Media | : -55 to 125°C (-67 to 257°F) |
| Operating (Ambient) | : -10°C to 70°C (14°F to 158°F) |
| Storage | : -10°C to 85°C (14°F to 185°F) |
| Thermal Limits | |
| Compensated Range | : 0°C to 55°C (32°F to 131°F) |
| TC Zero | : <±1.5% of FS |
| TC Span | : <±1.5% of FS |
Additional Information:
- Minimum Order Quantity: 3091976 Number
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: BY ORDER
Dwyer 628-06-GH-P1-E4-S1 Pressure Transmitter 0-5 PSI
Product Details:
| Minimum Order Quantity | 5 Piece |
| Model Number/Name | 628-06-GH-P1-E4-S1 |
| Measuring Rate | 0-5 psi |
| Steel Grade | Stainless Steel |
| Automation Grade | Manual |
| Material Grade | Stainless Steel |
| Condition | New |
| Measuring Ranges | 0-5 psi |
| Temperatures | 200 |
| Minimum Order Quantity | 12 No |
| Brand | DWYER USA |
Dwyer 628-06-GH-P1-E4-S1 PRESSURE TRANSMITTER 0-5 PSI
Dwyer 628-06-GH-P1-E4-S1 PRESSURE TRANSMITTER 0-5 PSIG
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta
Additional Information:
- Production Capacity: http://www.dpengineers.in
- Delivery Time: http://www.dpengineer.in
- Packaging Details: http://www.dpengineerindia.com
Dwyer 628-07-GH-P3-E4-S1 Pressure Transmitter 0-15 PSIG
| Minimum Order Quantity | 10 Number |
| Model Number/Name | SERIES 626 & 628 |
| Measuring Rate | DWYER 628-07-GH-P3-E4-S1 |
| Automation Grade | Manual |
| Range | 0-15 PSIG |
| Condition | New |
| Measuring Ranges | 0-15 PSIG |
| Usage/Application | Irrigation equipment |
| Applications | PTO systems |
| Response Time | 300 ms |
| Application | Pumping systems |
| Brand | Dwyer USA |
| Product Weight | 10 oz (283 g) |
Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
Dwyer 628-07-GH-P3-E4-S1 Industrial 316 SS Pressure Transmitter, 0-15 psig
MORE ABOUT THIS ITEM
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta
Additional Information:
- Production Capacity: http://www.dpengineerindia.com
- Delivery Time: http://www.dpengineersindia.in
- Packaging Details: http://www.dpengineers.info
.jpg)
Dwyer 628-07-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-15 PSIG
| Minimum Order Quantity | 10 Number |
| Model Number/Name | SERIES 626 & 628 |
| Measuring Rate | DWYER 628-07-GH-P3-E4-S1 |
| Automation Grade | Manual |
| Weight | 10 oz (283 g) |
| Range | 0-15 PSIG |
| Condition | New |
| Measuring Ranges | 0-15 PSIG |
| Usage/Application | Irrigation equipment |
| Applications | PTO systems |
| Response Time | 300 ms |
| Application | Pumping systems |
| Brand | Dwyer USA |
| Product Weight | 10 oz (283 g) |
Dwyer 628-07-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta
Additional Information:
- Production Capacity: http://www.dpengineers.info
- Delivery Time: http://www.dpengineersindia.in
- Packaging Details: http://www.dpengineer.co.in
Dwyer 628-13-GH-P1-E7-S1 Pressure Transmitter 0-300 PSIG
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | 628-13-GH-P1-E7-S1 |
| Measuring Rate | 0-300 PSIG |
| Automation Grade | Manual |
| Weight | 10 oz (283 g) |
| Range | 0-300 Psig |
| Condition | New |
| Measuring Ranges | 0-300 PSIG |
| Usage/Application | PTO systems |
| Applications | Pumping systems |
| Response Time | 300 ms. |
| Application | Booster stations |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Product Weight | 10 oz (283 g). |
Dwyer 628-13-GH-P1-E7-S1 PRESSURE TRANSMITTER 0-300 PSIG
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineer.co.in
- Delivery Time: http://www.dpengineer.in
- Packaging Details: http://www.dpengineers.in
Dwyer 628-70-GH-P3-E4-S1 Pressure Transmitter 0- 2 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | 628-70-GH-P3-E4-S1 |
| Measuring Rate | 0-2 Bar |
| Automation Grade | Manual |
| Weight | 10 oz (283 g) |
| Range | 0-2 Bar |
| Condition | New |
| Measuring Ranges | 0-2 Bar |
| Usage/Application | Irrigation equipment |
| Applications | Hydraulic |
| Response Time | 300 ms. |
| Application | Compressors |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Series | 626 & 628 |
Dwyer 628-70-GH-P3-E4-S1 PRESSURE TRANSMITTER 0- 2 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineers.co.in
- Delivery Time: http://www.dpengineersindia.com
- Packaging Details: http://www.dpengineersindia.in
Dwyer 628-75-GH-P3-E1-S1 Pressure Transmitter 0-10 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | DWYER 628-75-GH-P3-E1-S1 |
| Measuring Rate | 0-10 Bar |
| Automation Grade | Manual |
| Weight | 10 oz (283 g) |
| Range | 0-10 Bar |
| Condition | New |
| Measuring Ranges | 0-10 Bar |
| Usage/Application | Irrigation equipment |
| Applications | Hydraulic |
| Response Time | 300 ms. |
| Application | Irrigation System Pressure |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Series | 626 & 628 |
Dwyer 628-75-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-10 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineersindia.in
- Delivery Time: http://www.dpengineers.info
- Packaging Details: http://www.dp-engineers.com
Dwyer 628-90-GH-P3-E4-S1 Pressure Transmitter 0-16 Bar
Product Details:
| Minimum Order Quantity | 10 Piece |
| Brand | DWYER USA |
| Application | Booster stations |
| Product Weight | 10 oz (283 g) |
| Response Time | 300 ms. |
| Usage/Application | PTO systems |
| Model Number/Name | Dwyer 628-90-GH-P3-E4-S1 |
| Automation Grade | Manual |
| Measuring Ranges | 0-16 BAR |
| Condition | New |
| Measuring Rate | 0-16 BAR |
| Net Weight | 10 oz (283 g). |
| Applications | Pumping systems |
Dwyer 628-90-GH-P3-E4-S1 Pressure Transmitter 0-16 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineers.in
- Delivery Time: http://www.dpengineer.in
- Packaging Details: http://www.dpengineers.co.in
.jpg)
Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | 628-07-GH-P3-E1-S1 |
| Material | 316L stainless steel |
| Measuring Rate | 0-15 PSIG |
| Automation Grade | Manual |
| Condition | New |
| Measuring Ranges | 0-15 PSIG |
| Usage/Application | Booster stations |
| Response Time | 300 ms. |
| Application | PTO systems |
| Brand | Dwyer USA |
| Warranty | yes |
| Product Weight | 10 oz (283 g) |
Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta
Additional Information:
- Production Capacity: http://www.dpengineersdelhi.co.in
- Delivery Time: http://www.dpengineers.co.in
- Packaging Details: http://www.dpengineerindia.in
.jpg)
Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | 628-07-GH-P3-E1-S1 |
| Material | 316L stainless steel |
| Measuring Rate | 0-15 PSIG |
| Automation Grade | Manual |
| Condition | New |
| Measuring Ranges | 0-15 PSIG |
| Usage/Application | Booster stations |
| Response Time | 300 ms. |
| Application | PTO systems |
| Brand | Dwyer USA |
| Warranty | yes |
| Product Weight | 10 oz (283 g) |
Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta
Additional Information:
- Production Capacity: http://www.dpengineersdelhi.co.in
- Delivery Time: http://www.dpengineers.co.in
- Packaging Details: http://www.dpengineerindia.in
Dwyer 628-75-GH-P3-E4-S1 Pressure Transmitter 0-10 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | DWYER 628-75-GH-P3-E4-S1 |
| Measuring Rate | 0-10 BAR |
| Automation Grade | Manual |
| Accuracy | 1.0% FS |
| Condition | New |
| Measuring Ranges | 0-10 BAR |
| Usage/Application | Submersible pump control |
| Applications | Irrigation equipment |
| Response Time | 300 ms |
| Application | Pumping systems |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g) |
Dwyer 628-75-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-10 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dp-engineers.com
- Delivery Time: http://www.dpengineerindia.in
- Packaging Details: http://www.dpengineers.co.in
.jpg)
Dwyer 628-81-GH-P3-E1-S1 Pressure Transmitter 0-40 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | Dwyer 628-81-GH-P3-E1-S1 |
| Measuring Rate | 0-40 Bar |
| Automation Grade | Manual |
| Accuracy | 1.0% FS |
| Condition | New |
| Measuring Ranges | 0-40 Bar |
| Usage/Application | Submersible pump control |
| Applications | Irrigation equipment |
| Response Time | 300 ms |
| Application | Pumping systems |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g) |
Dwyer 628-81-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-40 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineers.co.in
- Delivery Time: http://www.dpengineersdelhi.co.in
- Packaging Details: http://www.dp-engineers.com
Dwyer 628-81-GH-P3-E4-S1 Pressure Transmitter 0-40 PSIG
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | DWYER 628-81-GH-P3-E4-S1 |
| Measuring Rate | 0-40 PSIG |
| Automation Grade | Manual |
| Condition | New |
| Usage/Application | Irrigation equipment |
| Response Time | 300 ms |
| Application | Submersible pump control |
| Brand | DWYER USA |
| Warranty | Yes |
| Product Weight | 10 oz (283 g) |
Dwyer 628-81-GH-P3-E4-S1 Pressure Transmitter 0-40 PSIG
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details
Additional Information:
- Production Capacity: http://www.dpengineers.co.in
- Delivery Time: http://www.dpengineersdelhi.co.in
- Packaging Details: http://www.dpengineerindia.in
Dwyer 628-82-GH-P3-E4-S1 Pressure Transmitter 0-70 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | DWYER 628-82-GH-P3-E4-S1 |
| Measuring Rate | 0-70 BAR |
| Steel Grade | 316L SS. |
| Automation Grade | Manual |
| Material Grade | Type 316L SS. |
| Range | 0-70 BAR |
| Condition | New |
| Usage/Application | Irrigation equipment |
| Response Time | 300 ms. |
| Application | Industrial process monitoring |
| Brand | DWYER USA |
| Product Weight | 10 oz (283 g). |
Dwyer 628-82-GH-P3-E4-S1 Pressure Transmitter 0-70 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dp-engineers.com
- Delivery Time: http://www.dpengineer.info
- Packaging Details: http://www.dpengineers.info
Dwyer 628-87-GH-P3-E1-S1 Pressure Transmitter 0-500 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 628-87-GH-P3-E1-S1 |
| Material | Type 316L SS. |
| Measuring Rate | 0-500 BAR |
| Steel Grade | Type 316L SS. |
| Automation Grade | Manual |
| Material Grade | Type 316L SS |
| Packing Size | 1 |
| Condition | New |
| Measuring Ranges | 0-500 BAR |
| Process Connection | 1/4 Inch male or female NPT and BSPT. |
| Usage/Application | Industrial process monitoring |
| Applications | Compressors |
| Range Of Product | 0-500 BAR |
| Response Time | 300 ms. |
| Service | Compatible gases and liquids |
| Mounting Orientation | Mount in any position |
| Application | Industrial process monitoring |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Product Weight | 10 oz (283 g). |
Dwyer 628-87-GH-P3-E1-S1 Pressure Transmitter 0-500 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineer.info
- Delivery Time: http://www.dp-engineers.com
- Packaging Details: http://www.dpengineerindia.in
Dwyer 628-91-GH-P3-E4-S1 Pressure Transmitter 0-6 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 628-91-GH-P3-E4-S1 |
| Material | Type 316L SS. |
| Measuring Rate | 0-6 BAR |
| Automation Grade | Manual |
| Material Grade | Type 316L SS. |
| Weight | 10 oz (283 g). |
| Range | 0-6 BAR |
| Condition | New |
| Usage/Application | Compatible gases and liquids |
| Applications | Industrial process monitoring |
| Service | Gases and Liquids. |
| Application | Compressors |
| Brand | DWYER USA |
| Product Weight | 10 oz (283 g). |
Dwyer 628-91-GH-P3-E4-S1 Pressure Transmitter 0-6 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
CompressorsPumping SystemsIrrigation System PressureIndustrial Process Monitoring Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineers.info
- Delivery Time: http://www.dpengineersindia.in
- Packaging Details: http://www.dpengineerindia.com
Dwyer 628-95-GH-P1-E1-S1 Pressure Transmitter 0-600 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 628-95-GH-P1-E4-S1 |
| Material | Type 316L SS. |
| Measuring Rate | 0-600 BAR |
| Packaging Type | 1 |
| Automation Grade | Manual |
| Material Grade | Type 316L SS |
| Packing Size | 1 |
| Weight | 10 oz (283 g). |
| Range | 0-600 BAR |
| Condition | New |
| Measuring Ranges | 0-600 BAR |
| Usage/Application | Compatible gases and liquids |
| Applications | Compressors |
| Connection Available | 1/4 Inch male or female NPT and BSPT. |
| Range Of Product | 0-600 BAR |
| Service | Gases and Liquids. |
| Application | Industrial process monitoring |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Product Weight | 10 oz (283 g). |
Dwyer 628-95-GH-P1-E1-S1 Pressure Transmitter 0-600 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
.jpg)
Dwyer 628-95-GH-P1-E4-S1 Pressure Transmitter 0-600 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Automation Grade | Manual |
| Measuring Ranges | 0-600 BAR |
| Measuring Rate | 0-600 BAR |
| Packaging Size | 1 |
| Steel Grade | Type 316L SS |
| Material Grade | Type 316L SS |
| Connection Available | 1/4 Inch male or female NPT and BSPT |
| Range Of Product | 0-600 BAR |
| Brand | DWYER USA |
| Application | Industrial process monitoring |
| Product Weight | 10 oz (283 g). |
| Usage/Application | Compatible gases and liquids |
| Net Weight | 10 oz (283 g). |
| Applications | Compressors |
| Weight | 10 oz (283 g). |
| Condition | New |
| Range | 0-600 BAR |
| Material | Type 316L SS. |
| Model Number/Name | DWYER 628-95-GH-P1-E4-S1 |
| Service | Gases and Liquids. |
Dwyer 628-95-GH-P1-E4-S1 Pressure Transmitter 0-600 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details
Additional Information:
- Production Capacity: http://www.dpengineersdelhi.co.in
- Delivery Time: http://www.dpengineers.co.in
- Packaging Details: http://www.dpengineerindia.in
Dwyer 628-76-GH-P1-E4-S5 Pressure Transmitter 0-12 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 628-76-GH-P1-E4-S5 |
| Material | Type 316L SS. |
| Measuring Rate | 0-12 BAR |
| Automation Grade | Manual |
| Material Grade | Type 316L SS |
| Packing Size | 1 |
| Weight | 10 oz (283 g). |
| Condition | New |
| Measuring Ranges | 0-12 BAR |
| Usage/Application | Industrial process monitoring |
| Applications | Compatible gases and liquids |
| Response Time | 300 ms. |
| Service | Gases and Liquids. |
| Application | Compressors |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
Dwyer 628-76-GH-P1-E4-S5 Pressure Transmitter 0-12 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineer.info
- Delivery Time: http://www.dpengineersindia.in
- Packaging Details: http://www.dpengineerindia.com
Dwyer 174777-00 Pressure Transmitter 0-21 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 174777-00 |
| Material | Type 316L SS. |
| Measuring Rate | 0-21 Bar |
| Packaging Size | 1 |
| Automation Grade | Manual |
| Material Grade | Type 316L SS. |
| Weight | 10 oz (283 g). |
| Mounting Type | Type 316L SS. |
| Condition | New |
| Measuring Ranges | 0-21 Bar |
| Process Connection | 1/4 Inch male or female NPT and BSPT. |
| Usage/Application | Compatible gases and liquids |
| Response Time | 300 ms. |
| Application | Compatible gases and liquids |
| Brand | DWYER USA |
| Packing Type | 1 |
| Product Weight | 10 oz (283 g). |
Dwyer 174777-00 Pressure Transmitter 0-21 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
CompressorsPumping SystemsIrrigation System PressureIndustrial Process MonitoringHydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineerindia.com
- Delivery Time: http://www.dpengineer.co.in
- Packaging Details: http://www.dpengineer.in
Dwyer 174779-00 Pressure Transmitter 0-400 Bar
Product Details:
| Minimum Order Quantity | 10 Number |
| Model Number/Name | DWYER 174779-00 |
| Measuring Rate | 0-400 BAR |
| Packaging Size | 1 |
| Steel Grade | Type 316L SS. |
| Automation Grade | Manual |
| Material Grade | Type 316L SS. |
| Weight | 10 oz (283 g). |
| Range | 0-400 BAR |
| Condition | New |
| Measuring Ranges | 0-400 BAR |
| Usage/Application | Industrial process monitoring |
| Range Of Product | 0-400 BAR |
| Response Time | 300 ms. |
| Application | Compatible gases and liquids |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
Dwyer 174779-00 Pressure Transmitter 0-400 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineer.co.in
- Delivery Time: http://www.dpengineers.info
- Packaging Details: http://www.dpengineer.info
Dwyer 628-83-GH-P3-E4-S1 Pressure Transmitter 0-100 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | DWYER 628-83-GH-P3-E4-S1 |
| Material | Type 316L SS. |
| Automation Grade | Manual |
| Material Grade | Type 316L SS. |
| Range | 0-100 BAR |
| Condition | New |
| Usage/Application | Industrial process monitoring |
| Applications | Irrigation equipment |
| Response Time | 300 ms. |
| Service | Gases and Liquids |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
Dwyer 628-83-GH-P3-E4-S1 Pressure Transmitter 0-100 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineer.info
- Delivery Time: http://www.dp-engineers.com
- Packaging Details: http://www.dpengineerindia.in
Dwyer 628-85-GH-P3-E1-S1 Pressure Transmitter 0-200 Bar
Product Details:
| Minimum Order Quantity | 5 Number |
| Model Number/Name | WYER 628-85-GH-P3-E1-S1 |
| Material | Type 316L SS. |
| Packaging Size | 1 |
| Steel Grade | 316L SS. |
| Automation Grade | Manual |
| Material Grade | 316L SS. |
| Range | 0-200 BAR |
| Condition | New |
| Measuring Ranges | 0-200 BAR |
| Modle | DWYER 628-85-GH-P3-E1-S1 |
| Usage/Application | Pumping systems |
| Applications | Irrigation equipment |
| Response Time | 300 ms. |
| Service | Compatible gases and liquids. |
| Application | Irrigation equipment |
| Brand | DWYER USA |
| Net Weight | 10 oz (283 g). |
| Product Weight | 10 oz (283 g). |
Dwyer 628-85-GH-P3-E1-S1 Pressure Transmitter 0-200 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
- Compressors
- Pumping Systems
- Irrigation System Pressure
- Industrial Process Monitoring
- Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.
Additional Information:
- Production Capacity: http://www.dpengineerindia.in
- Delivery Time: http://www.dpengineers.co.in
- Packaging Details: http://www.dpengineersdelhi.co.in
Series 251 - Wet/Wet Differential Pressure Transmitter
Product Details:
| Brand | Sensocon USA Series 251 |
Series 251 - Wet/Wet Differential Pressure Transmitter
• 0.25% Accuracy
• 316 Stainless Steel construction
• 1000 PSI working pressure
• 5:1 Turn down
• Certificate of Calibration
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Model Number Range
251-01 0 - 5 PSI ( 34.5 kPa )
251-02 0 - 10 PSI ( 68.9 kPa )
251-03 0 - 15 PSI ( 103 kPa )
251-04 0 - 30 PSI ( 206.8 kPa )
251-05 0 - 50 PSI ( 344.7 kPa )
251-06 0 - 100 PSI ( 689.5 kPa )
251-07 0 - 150 PSI ( 1034 kPa )
251-08 0 - 300 PSI ( 2068 kPa )
*Other ranges available upon request.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Sensocon USA Wet Differential Pressure Transmitter Series 251
Product Details:
| Brand | Sensocon USA Series 251 |
Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-01
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust
Model Number Range
251-01 0 - 5 PSI ( 34.5 kPa )
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Wet/Wet Differential Pressure Transmitter Series 251-02
Product Details:
| Brand | Sensocon USA Series 251 |
Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-02
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust
Model Number Range
251-02 0 - 10 PSI ( 68.9 kPa )
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Wet Differential Pressure Transmitter Series 251-03
Product Details:
| Brand | Sensocon |
Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-03
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust
Model Number Range
251-03 0 - 15 PSI ( 103 kPa )
Wet Differential Pressure Transmitter Series 251-04
Product Details:
| Brand | Sensocon |
Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-04
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust
Model Number Range
251-04 0 - 30 PSI ( 206.8 kPa )
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Wet Differential Pressure Transmitter Series 251-06
Product Details:
| Brand | Sensocon |
Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-06
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust
Model Number Range
251-06 0 - 100 PSI ( 689.5 kPa )
